Water Quality Association
05/07/2012


NSF/ANSI-61 International Standard for Drinking Water Additives

NSF/ANSI-61 Drinking Water System Components - Health Effects

This Standard establishes minimum health effects requirements for the chemical contaminants and impurities that are indirectly imparted to drinking water from products, components, and materials used in drinking water systems. This Standard does not establish performance, taste and odor, or microbial growth support requirements for drinking water systems products, components, or materials.

Drinking Water Treatment Products certified to NSF/ANSI 61 have not been tested or evaluated for contaminant reduction performance. Contaminant reduction testing and certification claims shall be evaluated via the industrys residential drinking water treatment standards.


3M Company - Corrosion Protection Products Division
3M Center
Bldg. 201-3N-06
St. Paul, MN 55144-1000
Phone: (651) 736-9030
http://www.3M.com/water

Product Type: Pipe Coating
Brand Name Model Water Contact Temp Water Contact Material Size
Scotchkote 3M Scotchkote Pipe Renewal Liner 2400 1 2 3 4 5 6 CLD 23 Polyurea Min 4" Pipe
1: Special Comments: Mix ratio of A:B is 1:1 by VOLUME
2: Maximum Thinner: None
3: Cure for a minimum of 1 hour @ a minimum of 37 degrees F
4: Flush with water for a minimum of 30 minutes @ 5 gpm
5: Maximum Field Use Dry Film Thickness (DFT) = 472 mils (12mm)
6: Number of Coats: 1

3M Purification Inc. (formerly CUNO)
400 Research Parkway
Meriden, CT 06450-5541
Phone: (203) 238-8965


Product Type: Filter
Brand Name Model Water Contact Temp Water Contact Material Size
N/A PolyKLEAN RW CLD 23 Various N/A
PolyKLEAN RT(LC)(GC)16(SC)(PC)(RC)(EMC)(OC) 1 CLD 23 Various N/A
Betafine XL XL(LC)PP(GC)(EMC)(OR) 2 CLD 23 Various N/A
N/A Betapure NT-T 3 CLD 23 Various N/A
1: LC denotes length (up to 62"); GC denotes grade code (Y, B, C, F, L, or Q); SC denotes surface modification (G = grooved, U = ungrooved); PC denotes packaging (1-5); RC denotes ring support (0-2); EMC denotes end modification (B, C, F, N, P, Q or R); OC denotes gasket or o-ring material (A, B, C, D, G, or N)
2: LC denotes length (09, 10, 19, 20, 29, 30, 39, or 40); GC denotes micron rating (002, 005, 010, 025, 050, 100, 200, 400, or 700); EMC denotes end treatment (B0, B1, B2, C1, C2, D, F0, F1, or F2); OR denotes o-ring material (A, B, C, or D).
3: This product has a minimum flow rate requirement of 6.6 gallons per day (25 L/day).

Ahlstrom Filtration, LLC
122 West Butler St.
Mt. Holly Springs, PA 17065
Phone: 717-486-6241


Product Type: Component
Brand Name Model Water Contact Temp Water Contact Material Size
Disruptor 5281 1 CLD 23 various various
Disruptor 5282 1 CLD 23 various various
Disruptor 5283 1 CLD 23 various various
Disruptor 5284 1 CLD 23 various various
Disruptor 5287 1 CLD 23 various various
Disruptor 5288 1 CLD 23 various various
Disruptor 5289 1 CLD 23 various various
Disruptor 5290 1 CLD 23 various various
1: Certification valid when the maximum water contact surface area/volume ratio is 235.5 square inches per Liter of water

Aldex Chemical Company, Ltd.
630 Laurent Street
Granby, QC J2G 8V1
Phone: (450) 372-8844
http://www.aldexchemical.com


Product Type: Ion Exchange Resin
Brand Name Model Water Contact Temp Water Contact Material Size
Aldex C-700 1 CLD 23 SYN -16 +40
Aldex C-700F 1 CLD 23 SYN -40 +60
Aldex C-800 1 CLD 23 SYN -16 +40
Aldex C-800F 1 CLD 23 SYN -40 +60
Aldex C-800X10 1 CLD 23 SYN -16 +40
1: This product is certified with a minimum flow rate of 0.28 gpm/ft of media for Process Media Applications (small and large systems). Any flow rate is acceptable for Point of Entry (POE) applications.

All Service Contracting Corp
2024 E.Damon Ave
Decatur, IL 62526
Phone: 217-233-3018
http://www.allservice.com


Product Type: Accessories
Brand Name Model Water Contact Temp Water Contact Material Size
All Service Under-Drain Insert 1 CLD 23 N/A N/A
1: This product is certified with a minimum flow rate of 5.5 gallons per minute.

American Grating, LLC
1191 Center Point Drive
Henderson, NV 89074
Phone: (801)913-4557 (mobile)
http://www.amgrating.com


Product Type: Accessories
Brand Name Model Water Contact Temp Water Contact Material Size
N/A Molded Structural Components 1 CLD 23 Proprietary N/A
N/A Pultruded Structural Components 2 CLD 23 Proprietary N/A
1: Max SA/V ratio = 1.2 sq. cm/L
2: Max SA/V ratio = 50 sq. cm/L

Ameriflow Water Systems Inc.
525 W. 21st. Street
Tempe, AZ 85282
Phone: (602) 275-4188 x891
http://www.ameriflowwater.com


Product Type: Faucet
Brand Name Model Water Contact Temp Water Contact Material Size
Krystal Pure: Bisque 11-07-251231 N/A N/A N/A
Krystal Pure: Black 11-07-25122 N/A N/A N/A
Krystal Pure: Chrome 11-07-25124 N/A N/A N/A
Krystal Pure: Chrome 11-07-25131 N/A N/A N/A
Krystal Pure: Oil Rubbed Bronze 11-07-25133 N/A N/A N/A
Krystal Pure: Satin Nickel 11-07-25129 N/A N/A N/A
Krystal Pure: Satin Nickel 11-07-25132 N/A N/A N/A
Krystal Pure: White 11-07-25121 N/A N/A N/A

APEC Water Systems
1320 S. Johnson Drive
City of Industry, CA 91748
Phone: 800-880-4808
http://www.freedrinkingwater.com


Product Type: Point-of-Entry
Brand Name Model Water Contact Temp Water Contact Material Size
Futura Futura 10 Cold 23 C Various 9 X 48
Futura Futura 15 Cold 23 C Various 10 X 54
Futura Futura 20 Cold 23 C Various 12 X 52

Aquafin, Inc
505 Blue Ball Rd #160
Elkton, MD 21921
Phone: (410) 392-2300
http://www.aquafin.net


Product Type: Coating
Brand Name Model Water Contact Temp Water Contact Material Size
  Aquafin-2K/M 1 CLD 23 Various >=800
  Aquafin-2K/M White 1 CLD 23 Various >=800
Aquafin MORTAR-40 CLD 23 CMNT >= 9000 gallons
Aquafin MORTAR-LN CLD 23 CMNT >= 1000 gallons
Aquafin PLUG-IC CLD 23 CMNT >= 1000 gallons
N/A AQUAFIN-1K CLD 23 CMNT >=1000 gallons
N/A AQUAFIN-1K WHITE CLD 23 CMNT >=1000 gallons
Product Type: Concrete Admixture
N/A AQUAFIN-1C ADMIX 2 CLD 23 CMNT N/A
1: Number of Coats: 2; Maximum Field Use Dry Film Thickness (in mils): 90 wet; Recoat Cure Time and; Temperature: 1.5 hours at 20C; Final Cure Time and Temperature: 7 days at 20C; Special Comments: Mix ratio of Part A:Part B is 5:3 by volume (Part A is powder and Part B is liquid). Following final cure time, tanks should be kept full of a minimum of 3 days prior to use. Certified for use as a bonding agent with or without Aquafin's Joint Sealing Tape-2000 and Joint Sealing Tape-2000-S at 10% of a 20,000 gallon tank and greater. Certified as a coating for tanks 800 gallons and greater.
2: Certified for a level not to exceed 40 fluid ounces per 100 pounds of cement. Certified for use in tanks 100 gallons and greater.

Aquion, Inc.
2080 E Lunt Avenue
Elk Grove Village, IL 60007
Phone: (847) 758-5912
http://www.rainsoft.com


Product Type: Point-of-Entry
Brand Name Model Water Contact Temp Water Contact Material Size
ProSystems, Harmony BF, Harmony PSI, Pro Series Whole House Carbon Filter 1.0 Cold 23C Various  
ProSystems, Harmony BF, Harmony PSI, Pro Series Whole House Carbon Filter 1.5 Cold 23C Various  
ProSystems, Harmony BF, Harmony PSI, Pro Series Whole House Carbon Filter 2.0 Cold 23C Various  
ProSystems, Harmony BF, Harmony PSI, Pro Series Whole House Carbon Filter Executive 2.0 Cold 23C Various  
Product Type: Water Softener
ProSystems, Harmony BF, Harmony PSI, Pro Series Water Conditioner 1.0 CLD 23C Various Tank: 10 X 44
ProSystems, Harmony BF, Harmony PSI, Pro Series Water Conditioner 1.5 CLD 23C Various Tank: 10 X 54
ProSystems, Harmony BF, Harmony PSI, Pro Series Water Conditioner 2.0 CLD 23C Various Tank: 12 X 48
ProSystems, Harmony BF, Harmony PSI, Pro Series Water Conditioner Executive 2.0 CLD 23C Various Tank: 13 X 54

Aquionics Inc
21 Kenton Lands Road
Erlanger, KY 41018
Phone: 859-341-0710
http://www.aquionics.com


Product Type: Disinfection/Generators Ultraviolet
Brand Name Model Water Contact Temp Water Contact Material Size
Aquionics Inline 1000+ Cold (73F/23C)   8" Flange
Aquionics Inline 12000+ Cold (73F/23C)   20" Flange
Aquionics Inline 14000+ Cold (73F/23C)   20" Flange
Aquionics Inline 4000+ Cold (73F/23C)   14" Flange
Aquionics Inline 450+ Cold (73F/23C)   8" Flange
Aquionics Inline 4500+ Cold (73F/23C)   14" Flange
PharmaLine PQL16 CLD 23    
PharmaLine PQL36 CLD 23    
PharmaLine PQL9 CLD 23    
PharmaLine PQP16 CLD 23    
PharmaLine PQP30 CLD 23    
PharmaLine PQP8 CLD 23    
PharmaLine PQP90 CLD 23    
Proline D140+ CLD 23    
Proline D270+ CLD 23    
Proline D500+ CLD 23    
Proline+ 0014 USEPA CLD 23    
Proline+ 0027 USEPA CLD 23    
Proline+ 0116 USEPA CLD 23    
PureLine PQ16 CLD 23    
PureLine PQ36 CLD 23    
PureLine PQ8 CLD 23    
PureLine PQ90 CLD 23    

ARAMARK Refreshment Services
1101 Market Street
Philadelphia, PA 19107
Phone: 215-238-3000


Product Type: In Tank Filtration Device
Brand Name Model Water Contact Temp Water Contact Material Size
Aramark Refresh Center 12-CHCMU3-ARA CLD23 Various N/A
Aramark Refresh Center 12-RC-1 CLD23 Various N/A
Aramark Refresh Center 12-RC-2 CLD23 Various N/A
Aramark Refresh Center 12-RCP-1 CLD23 Various N/A
Aramark Refresh Center 12-RCPC-1 CLD23 Various N/A

ATLAS FILTRI s.r.l.
Via del Santo 227
Limena, I-35010
Phone: +39-049-76 90 55
http://www.atlasfiltri.com


Product Type: Component
Brand Name Model Water Contact Temp Water Contact Material Size
N/A DP PLUS 10 DUO IN BW CLD 23C Various 10"
N/A DP PLUS 10 DUO IN TS CLD 23C Various 10"
N/A DP PLUS 10 MONO IN BW CLD 23C Various 10"
N/A DP PLUS 10 MONO IN TS CLD 23C Various 10"
N/A DP PLUS 10 TRIO IN BW CLD 23C Various 10"
N/A DP PLUS 10 TRIO IN TS CLD 23C Various 10"
SANIC CPP C-23 PP 7-20"
SANIC FA C-23 PP 7-20"

Atlas Tech Products
4640 Brinell Street
San Diego, CA 92111
Phone: (858) 277-2100
http://www.atlastechproducts.com


Product Type: Concrete Form Release Agent
Brand Name Model Water Contact Temp Water Contact Material Size
N/A Atlas Bio-Guard 1 CLD 23 N/A N/A
Product Type: Sealant
N/A Atlas Quantum-Cure 61 2 CLD 23 SLT N/A
1: This product is certified at a maximum surface area to volume ratio not to exceed 0.082 sq in/L.
2: This product is certified at a maximum surface area to volume ratio not to exceed 0.18 sq in/L (1.1 sq cm/L).

Auchtel Products Limited
142/C Victor House, 2nd Floor
N.M. Joshi Marg, Lower Parel (W)
Mumbai, 400013
Phone: (91) 22-4063 2600
http://www.auchtel.com


Product Type: Ion Exchange Resin
Brand Name Model Water Contact Temp Water Contact Material Size
Auchtel Products Limited C20 1 CLD Various 0.3 mm -1.2 mm
Auchtel Products Limited C206 1 CLD Various 0.3 mm -1.2 mm
Auchtel Products Limited C20E 1 CLD Various 0.3 mm -1.2 mm
Auchtel Products Limited C220 1 CLD Various 0.3 mm -1.2 mm
Auchtel Products Limited C220E 1 CLD Various 0.3 mm -1.2 mm
Auchtel Products Limited C255 1 CLD Various 0.3 mm -1.2 mm
Auchtel Products Limited C255E 1 CLD Various 0.3 mm -1.2 mm
1: This product is certified with a minimum flow rate of 4.1 gpm per cubic foot of media when used in Process Media Applications.

Azon USA Inc
643 West Crosstown Parkway
Kalamazoo, MI 49008
Phone: 269-385-5942
http://www.azonintl.com/


Product Type: Joining and Sealing Material
Brand Name Model Water Contact Temp Water Contact Material Size
N/A Azo-Grout 424 with Azo-Cat 25 1 CLD 23C Various N/A
N/A Azo-Grout 443 with Azo-Cat 25 2 CLD 23C Various N/A
N/A Azo-Grout 675 3 CLD 23C Various N/A
1: Certified when used in a 9:1 mixture of Resin:Catalyst. This mixture is then reacted with up to five parts water per hundred parts of the Resin/Catalyst mixture. Cold end-use temperature (23C), at a maximum field SA/V ratio of 0.008 cm2/L.
2: Certified when used in a 20:1 mixture of Resin:Catalyst. This mixture is then reacted with up to five parts water per hundred parts of the Resin/Catalyst mixture. Cold end-use temperature (23C), at a maximum field SA/V ratio of 6.8 cm2/L.
3: Certified when used in a 2:1 mixture with water, cold end use temperature (23C) at a maximum field SA/V ratio of 15 cm2/L

BASF Construction Chemicals
889 Valley Park Drive
Shakopee, MN 55379
Phone: (952) 496-6000
http://www.buildingsystems.basf.com


Product Type: Joining and Sealing Material
Brand Name Model Water Contact Temp Water Contact Material Size
N/A 1200 Series Accelerator 1 CLD 23 Various N/A
N/A Concresive 1210 2 CLD 23 Various N/A
N/A Concresive 1230 1 CLD 23 Various N/A
1: Certified when used in a 9:1 mixture of Resin:Catalyst. This mixture is then reacted with up to five parts water per hundred parts of the Resin/Catalyst mixture. Cold end-use temperature (23C), at a maximum field SA/V ratio of 0.008 cm2/L.
2: Certified when used in a 2:1 mixture with water, cold end use temperature (23C) at a maximum field SA/V ratio of 15 cm2/L

Beijing JieMeng Zhixing Environmental Protection Tech Co., Ltd
Shahe Industrial Area
Changping District
Beijing, 102206
Phone: 0086-1-069-730336


Product Type: Tanks
Brand Name Model Water Contact Temp Water Contact Material Size
  10x17-2.5 NPSM C23 Various 10 x 17
  10x35-2.5 NPSM C23 Various 10 x 35
  10x44-2.5 NPSM C23 Various 10 x 44
  10x54-2.5 NPSM C23 Various 10 x 54
  7x13-2.5 NPSM C23 Various 7 x 13
  7x17-2.5 NPSM C23 Various 7 x 17
  7x35-2.5 NPSM C23 Various 7 x 35
  8x17-2.5 NPSM C23 Various 8 x 17
  8x35-2.5 NPSM C23 Various 8 x 35
  8x44-2.5 NPSM C23 Various 8 x 44
  9x35-2.5 NPSM C23 Various 9 x 35
  9x42-2.5 NPSM C23 Various 9 x 42
  9x48-2.5 NPSM C23 Various 9 x 48

Brenntag Southeast Inc.
2000 East Pettigrew Street
P.O. Box 1491
Durham, NC 27703
Phone: (919) 596-0681
http://www.brenntagsoutheast.com


Product Type: Powder
Brand Name Model Water Contact Temp Water Contact Material Size
N/A BrennCarb 1000 1 CLD 23C Carbon Slurry 100-325 Mesh
1: This product is a carbon slurry. The product is approved up to a maximum use level of 250 mg dry carbon per liter or 1042 mg slurry (carbon and water) per liter.

C.I.M. Industries Inc.
23 Elm Street
Peterborough, NH 03458
Phone: (800)543-3458
http://www.cimind.com


Product Type: Coating