|
197: Maximum surface area to volume ratio of 21.3 sq cm/L for tanks greater than 5,000 gallons for cold applications as barrier materials.
|
|
198: Maximum surface area to volume ratio of 10.3 sq cm/L for tanks greater than 50,000 gallons for hot applications as barrier materials.
|
|
199: CIM 1061 consists of CIM 1061 premix and CIM 1061 activator mixed in a 40 to 6 ratio by weight.
|
|
200: CIM 1000 Trowel Grade consists of CIM 1000TG premix and CIM 1000TG activator mixed in a 36 to 5.5 ratio by weight.
|
|
201: Also Classified is CIM Bonding Agent as an optional primer (minimum coverage rate of 300 ft 2/gal with a minimum drying time of 30 minutes). The following use restrictions apply: Number of coats: as many as needed to reach the Maximum Field Use Dry Film Thickness of 60 mils, Minimum Cure Temperature: 60 F, Re-coat/cure time: 3 hours/ 2 weeks as barrier materials.
|
|
202: Maximum surface area to volume ratio of 13.5 sq cm/L for tanks greater than 20,000 gallons for cold applications as barrier materials.
|
|
203: Also Classified is CIM Bonding Agent as an optional primer (minimum coverage rate of 300 ft 2/gal with a minimum drying time of 30 minutes). The following use restrictions apply: Number of coats: as many as needed to reach the Maximum Field Use Dry Film Thickness of 80 mils, Minimum Cure Temperature: 60 F, Re-coat/cure time: 3 hours/1 week for cold applications as barrier materials.
|
|
204: Washing procedure: These coatings must be washed according to CIM's "Decontamination or washing procedures for potable water tank and fish pond services" before being put into service.
|
|
205: The coating is approved to be used over Scrim, which is a polyethylene material which is typically applied over the crack before the coating is applied for barrier materials.
|
|
219: Maximum surface area to volume ration of 5.8 sq cm/L for tanks greater than 250,000 gallons.
|
|
220: CIM 2000 consists of CIM 2000 premix and CIM 2000 activator mixed in a 34.5 to 7.5 ratio by weight.
|
|
221: Also Classified is CIM Bonding Agent as an optional primer (minimum coverage rate of 300 ft 2/gal with a minimum drying time of 30 minutes). The following use restrictions apply: Number of coats: as many as needed to reach the Maximum Field Use Dry Film Thickness of 80 mils, Minimum Cure Temperature: 60 F, Re-coat/cure time: 3 hours/1 day.
|
|
222: CIM 2000 consists of CIM 2000TG premix and CIM 2000TG activator mixed in a 5.5 to 1 ratio.
|
|
317: Maximum surface area to volume ratio of 21.3 sq cm/L for use up to 10% of 10 gal. tanks or greater for joining and sealing materials.
|
|
318: Also Classified as CIM Bonding Agent as an optional primer (minimum coverage rate of 300 ft 2/gal witha minimum drying time of 30 minutes). The following use instructions apply: Minimum cure temperature: 60 F - Minimum cure time: 2 weeks for cold application as joining and sealing materials.
|
|
507: When this product is sold in a caulk type cartridge, the total coverage is limited to 5% of the total approved surface area.
|
