Find Gold Seal Certified Products

Water Quality Association

8/7/2020

CERTIFIED DRINKING WATER TREATMENT UNITS

NSF/ANSI 53 - 2019: Drinking Water Treatment Units - Health Effects

This on-line directory is continuously updated to identify those water treatment equipment products that have been tested and passed stringent industry standards to become certified by the Water Quality Association.

Certification means that a production model of the listed line of drinking water treatment units was tested at the Water Quality Association laboratory, or any of the other testing laboratories recognized by the Water Quality Association, and was found to have met the standards for reduction of specific health-related contaminants in drinking water. In addition, the materials and components used in these certified drinking water treatment units have met the rigorous safety and structural integrity and strength requirements set by industry Standard NSF/ANSI-53.

Replacement Components for a system may or may not reduce all reduction claims that system makes. Verify through literature what contaminant(s) each replacement component reduces. Note that replacement component(s) may be required for system to operate properly even though that same replacement component may not reduce contaminants for claims made under this standard.

Stand-alone components certified for materials safety and structural integrity (as applicable) requirements only may also have notes indicating that the component has been tested for the reduction of specific contaminants. Because components certified only for materials safety and structural requirements are incapable of functioning without the use of additional components or by being placed into a complete system, performance reduction claims listed as a note are for informational purposes, shall not be considered certified, and may not perform exactly as stated when placed into a system.

VOC Reduction claims include reduction of the following chemicals:

alachlor
atrazine
benzene
carbofuran
carbon tetrachloride
chlorobenzene
chloropicrin
2,4-D
dibromochloroproane (DBCP)
o-dichlorobenzene
p-dichlorobenzene
1,2-dichloroethane
1,1-dichloroethylene
cis-1,2-dichloroethylene
trans-1,2-dichloroethylene
1,2-dichloropropane
cis-1,3-dichloropropylene

dinoseb
endrin
ethylbenzene
ethylene dibromide (EDB)
haloacetonitriles (HAN)
bromochloroacetonitrile
dibromoacetonitrile
dichloroacetonitrile
trichloroacetonitrile
haloketones (HK)
1,1-dichloro-2-propanone
1,1,1-trichloro-2-propanone
heptachlor (H-34, Heptox)
heptachlor epoxide
hexachlorobutadiene
hexachlorocyclopentadiene
lindane

methoxychlor
pentachlorophenol
simazine
styrene
1,1,2,2-tetrachloroethane
tetrachloroethylene
toluene
2,4,5-TP (silvex)
tribromoacetic acid
1,2,4-trichlorobenzene
1,1,1-trichloroethane
1,1,2-trichloroethane
trichloroethylene
trihalomethanes
chloroform
bromoform
bromodichloromethane
chlorodibromomethane
xylenes

Waterlogic International, Ltd.

1 Grenfell Road Maidenhead, SL6 1HN united kingdom Phone: 44 125 640-0110

http://www.waterlogic.com/

- Product Type: Point-of-Use
  - Brand Name
    
    Model Number
    
    Flowrate
    
    Replace Component
    
    Capacity
    
    Reduction_ClaimID
  - WL2 FX
    
    12-CHCFW3-YYY ¹
    
    0.5
    
    FT-0063-IL-XXX
    
    1250
    
    Asbestos, Cyst, Lead
  - WL2 FX
    
    12-CHCMFW3-YYY ¹
    
    0.5
    
    FT-0063-IL-XXX
    
    1250
    
    Asbestos, Cyst, Lead
  - WL800
    
    16-MAXH2
    
    0.07
    
    CIFN14-PLUS
    
    308
    
    VOC (as chloroform)

¹ This model is available with either a phototransistor (European market) or UVC monitor (American market). For European market models that require a phototransistor monitor, the UV light bulb must be replaced every 6 months by the consumer, otherwise the certification is void.

Water Quality Association

CERTIFIED DRINKING WATER TREATMENT UNITS

NSF/ANSI 53 - 2019: Drinking Water Treatment Units - Health Effects

Waterlogic International, Ltd.

Product Type: Point-of-Use